Flagmakers can cater for almost any request, from pennants to billboards, we've done it all.
Flagmakers reinforced PVC digitally printed banners are an ideal
choice where heavy duty or large format signage is required.
TePapa Unveiled PVC Banner
OVERSIZE VEHICLE PVC Banner
Talk to us if you need urgent supply.
We deliver NZ wide.
Flagmakers print and deliver flags and banners to anywhere in New Zealand including: Christchurch, Dunedin, Nelson, Timaru, New Plymouth, Napier, Hastings, Hamilton, Tauranga, Rotorua, Taupo.
The product is only recommended for use as described in the ‘Uses’ section. It is not recommended for use outside these recommendations.
Flagmakers Ltd shall not be liable for any actions or consequences, legal or otherwise, arising from the use of the images or words. Images and words may have copyright or trademark protection and it is the client’s responsibility to determine the rights to use the images or words.
It is the owner’s responsibility to care for the product, i.e. keep it clean, occasionally lubricate spigots, keep dirt and grime out of moving parts.
The life of the product will be determined largely on where and how it is used. It is important to note that just one storm can damage a flag and or pole components.
Expected flag Life:
Flags and banners are made from fabric and therefore are subject to wear and tear. Although Flagmakers’ products are made from the highest quality fabrics available and use colour fast dyes, they are subject to often harsh UV, rain and wind conditions. Therefore a flag flying continuously is expected to show colour fade and some edge wearing after about 2 months under ‘normal’ weather conditions, i.e. no high winds, storms etc. The typical flag life will be between 3 to 6 months, if flying continuously, before requiring replacement.
Expected Hardware Life:
Hardware components are made from fibreglass, metal or plastic. The expected life of these components is approximately 2 years under ‘normal’ conditions of use. Normal conditions of use exclude excessive stress due to high wind loadings and continuous exposure to rain, sunlight and UV. All components will colour fade when exposed to UV and moisture, salt etc.
For flags and fabric banners requiring colour photographic images, very detailed line art and other complex graphics, 'dye sublimation' or direct to fabric digital printing is an impressive option. It enables the reproduction of high-resolution artwork and is economical for small runs.
It is ideally suited to producing banners, especially for indoor use where high quality fabric signage is unbeatable.
Flagmakers Polyknit, Polybunting or Ice Satin fabrics can be used, and these are printed in Single Sided, Colour-through and Double Sided print qualities., depending on the product.
Flagmakers dye sublimation digitally printed flags and banners are made on expensive, highly sophisticated and up to date equipment, operated by skilled technicians. The results have won several printing awards for quality, and are among the best available anywhere in the world.
Despite its sophistication,digital printing is not without its limitations however, and it is important to understand and acknowledge these. Please refer to the following and feel free to discuss any details further with Flagmakers.
All colours and tones are produced by a mixture of four dye colours (or sometimes 6), printed in small dots. These four "process" colours are cyan, magenta, yellow and black, or "CMYK" (our products are actually printed with both standard and light shades of CMYK to provide superior results). However, precise colour matching (to PMS colours for example) is not always possible.
Computer software and hardware tends to interpret colour information differently, and shades will vary slightly when viewed on different monitors or when printed by different printers etc. They may also differ when digitally printed onto fabric or other substrates, as this creates more variables. Printing onto different types of fabric may also provide slightly different results.
When colour files are supplied in CMYK format we must use them ‘as is’. We cannot adjust colour levels during the printing process (to counter individual colour variances, for example) as any adjustment will effect the total image.
Tests show that our digitally printed flags and banners perform well when used for exterior use, but like all coloured fabrics, some fading will be inevitable, and some colours/shades will fade more rapidly than others. This can ultimately result in colours becoming less intense, and/or an alteration in the shades. Consequently, as this process can produce literally hundreds of thousands of different shades, colour fastness cannot be accurately predicted.
Award winning print quality - Flagmakers digital and dye screen printing has won many Pride in Print Awards for its quality.
Flagmakers PVC banners will not tear or crease permanently like other banner materials and is water resistant, washable, light weight and compact. Perfect for storage or transportation.
PVC banners can be made any size or shape. We also offer an extensive range of high quality and innovative display methods to ensure your banners are displayed to their full advantage in all situations
The design is reproduced directly from a digital computer file, and is printed
directly onto the PVC fabric using commercial large format inkjet printers.
This method utilises leading edge technology, and is ideally suited to producing
stunning banners - for both indoor and indoor use. PVC fabrics available range
from light to heavy weight including blockout PVC.
For larger quantities we also offer screen printing. It is our aim to provide the
best possible product, at the best price, supplied to you when you need it.
Please contact us to enquire about this product or to make an order